THE UK’s LEADING VINTAGE RADIO REPAIR AND RESTORATION CENTRE
Many valve amps from the nineteen sixties and seventies are still around and are still doing an amazing job. Some use EL34s in push pull whereas others use KT66s or just one EL84 for single ended output. Whether small or powerful, valve amps are still sought after today. Do you have a valve amp in need of repair or servicing? I repair most makes of valve amplifiers such as Quad, WEM, Selmer, Watkins etc, so contact me and we'll talk about your amp. |
|||||
 Pye Black Box amplifier chassis click HERE for repairs |
 |
OR CALL ME ON SKYPE
If I happen to be away or I don't answer immediately, I'll probably only be a few minutes. I'm usually in the workshop from 7am until early evening, except for weekends. |
READ THIS IMPORTANT WARNING NOTICE ONLY BUY A RESTORED RADIO FROM A COMPETENT RADIO ENGINEER Many early mains radios have a live chassis. That means that the metal work inside the radio may be LIVE (connected to the mains) and it can KILL YOU if you come into contact with it. Exposed screws or any other metal work on the outside of the cabinet or fascia of the radio must be checked for safety by a competent engineer. DO NOT CONNECT EXTERNAL WIRING TO SOCKETS ON YOUR RADIO UNLESS THE RADIO HAS BEEN CHECKED AND CERTIFIED AS SAFE BY A QUALIFIED ENGINEER |
