BUSH DAC10 VALVE MAINS RADIO
THE UK’s LEADING VINTAGE RADIO REPAIR AND RESTORATION CENTRE

 

BUSH DAC 10

CLICK THE IMAGES FOR LARGER PICTURES

Bush DAC10 chassis - above
Bush DAC10 vintage radio
Bush DAC10 chassis - above
Bush DAC10 chassis - above
Bush DAC10 vintage valve radio
Bush DAC10 chassis - under

    RADIO SPECIFICATIONS

    Manufactured from 1950
    Long and Medium Wave
    Valves - UCH42 UF41 UBC41 UL41 UY41
    AC/DC Supply

The Bush DAC10 radio was introduced in 1950. It uses a chassis very similar to the DAC90A, but the DAC10 has push button pre-set station tuning as well as manual tuning. There are two pre-set buttons for medium wave and one for long wave.

Bush DAC 10 Service Manual HERE


  

 

 

READ THIS IMPORTANT WARNING NOTICE

ONLY BUY A RESTORED RADIO FROM A COMPETENT RADIO ENGINEER
ONLY HAVE YOUR RADIO REPAIRED BY A COMPETENT RADIO ENGINEER

Many early mains radios have a live chassis. That means that the metal work inside the radio may be LIVE (connected to the mains) and it can KILL YOU if you come into contact with it. Exposed screws or any other metal work on the outside of the cabinet or fascia of the radio must be checked for safety by a competent engineer.

DO NOT CONNECT EXTERNAL WIRING TO SOCKETS ON YOUR RADIO UNLESS THE RADIO HAS BEEN CHECKED AND CERTIFIED AS SAFE BY A QUALIFIED ENGINEER

If in any doubt, consult a qualified radio engineer.

PHONE ME

OR CALL ME ON SKYPE
click below

My status  

If I happen to be away or I don't answer immediately, I'll probably only be a few minutes. I'm usually in the workshop from 7am until mid evening, except for weekends.

 

I'M IN WORTHING, WEST SUSSEX
WORTHING BRIGHTON ARUNDEL CHICHESTER HORSHAM BOGNOR LANCING VINTAGE WIRELESS SALES REPAIRS
THE RADIO WORKSHOP
VINTAGE RADIO REPAIRS AND SALES